JOSCAR Certificate – Services for the Aerospace, Defence and Security Sectors

Cannon Technologies Group has satisfied all the requirements to become fully registered on the JOSCAR supplier accreditation register.

Services for the Aerospace, Defence and Security Sectors

JOSCAR is a collaborative tool used by the aerospace, defence and security industry to act as a single repository for pre-qualification and compliance information. Using JOSCAR can determine if a supplier is “fit for business”.

The JOSCAR Registration Mark is valued by some of the largest purchasers in the defence community and indicates that your organisation has gone through the process required to demonstrate its commitment and credentials to the industry.

Benefits for buyers

  • EASIER REGULATORY REQUIREMENT

    Comprehensive, accurate and regular updated insight into third party risk.

  • SINGLE SOURCE OF TRUTH

    Thousands of third parties in a single, searchable, reportable and easily accessible system

  • REDUCED PROCUREMENT TIMESCALES

    Instant access to third party information, reducing the time needed to qualify new suppliers or renew contracts.

  • HIGH QUALITY VALIDATED INFORMATION

    We check all third party information in accordance with a consistent, objective and continually updated process

  • COST AND RESOURCE EFFICIENT

    Costs are shared amongst community members, significantly reducing the cost of an in-house solution

  • PEER NETWORK

    Access to the combined experience and resources of other members in the community with shared goals and challenge

JOSCAR Certificate

SMAS SSIP WorkSafe Certificate

Cannon Technologies Group achieves the UK’s SSIP Scheme of choice and attain a Health & Safety certificate recognised by thousands of organisations.

Since the launch of SSIP assessments in May 2009, many construction companies and Principal Contractors now adopt this approach to Health & Safety pre-qualification and will only appoint contractors holding a valid and in-date certificate issued by an SSIP Member Scheme.

SMAS Worksafe is the UK’s SSIP scheme of choice and they’ve helped Cannon Tech and thousands of other contractors to show their commitment to workplace safety, secure work with trusted organisations through their SSIP assessments.

Along with other contractors, Cannon Tech lead the way in workplace safety regulation and compliance.

By holding the latest valid SSIP Member Scheme certificate Cannon Tech demonstrating our capability in meeting the ‘core criteria’, this enhances our businesses compliance, and shows our commitment to safe and responsible workplace management.

SMAS SSIP Certificate

ISO 27001: 2013 Information Security Management System

Cannon Technologies Group puts a priority on protecting its customers’ data. Over the past 18 months, the company has worked aggressively to meet the strictest security requirements in the industry. Those efforts have resulted in the company becoming ISO 27001 : 2013 certified, receiving accreditation for our Information Security Management System (ISMS).

With certification, Cannon has become the only company in the Modular DC and Enclosure industry to guarantee the use of robust data security controls conforming with this internationally recognized standard.

ISO 27001:2013  Quality Certificate

Cyber Essentials Plus

Cannon Technologies Group achieves Cyber Essentials Plus certification.  Independent assessment shows robust cybersecurity principles and capabilities across Cannon Technologies sites and our Accreditation demonstrates high cybersecurity standards,  Certification is essential for bidding for critical national infrastructure projects and Cannon has reached a major cybersecurity milestone as it is awarded Cyber Essentials Plus (CE+) certification, a UK government-backed, industry-supported certification for cybersecurity.

The certification demonstrates that the company’s policies and procedures are strong enough to protect against cyber threats. CE+ requires independent verification by an external auditor who conducts a series of technical assessments to ensure the company is protected against various attack scenarios. The evaluation, assessed:

* Boundary firewalls

* Secure asset configuration

* Patch management

* User access controls

* Malware protection

* Mobile assets

Cyber Essentials is a government-backed scheme that helps companies protect themselves against a wide variety of the most common cyber-attacks and was introduced by the UK Government’s National Cyber Security Centre (NCSC).

Cyber Essentials Plus Certificate

ISO 9001: 2015 Quality Management Systems

High Quality has always been a core value of the Cannon Technologies Group.

Currently Cannon Technologies is certified by the British Standard Institution (BSI) to the highest level possible ISO 9001:2015 and was one of the first organisations to achieve this certification.

Quality procedures are fully integrated into the Cannon culture to ensure that Cannon customers receive predicable and continuous high quality products and services.

Cannon Technologies Group

Company Quality Policy Statement

Cannon Technologies specialises in the design, procurement and manufacture of Data Management Systems; enclosures and associated equipment, Supplying mainly to technology markets.

The nature of the company’s activities places particular emphasis on experience, expertise, capability, performance, safety, reliability and quality.

A key way to achieve this is by operating a Quality Management System in accordance with the requirements of ISO 9001: 2015

Top Management is committed to:-

  1. Satisfying the requirements by ensuring that Customer and applicable statutory regulations are determined; understood and met.
  2. Continual improvement of the QMS by ensuring that risks and opportunities that may affect conformity of products and services and the ability to enhance Customer satisfaction are determined and the focus on enhancing Customer Satisfaction is maintained.

Top Management shall:-

  1. Take accountability for the effectiveness of the Companies QMS.
  2. Ensure the Quality Policy and Quality objectives that are established for the QMS are compatible with the strategic direction of the Company.
  3. Ensure Quality objectives have been set and are maintained and monitored as part of the QMS internal auditing programme
  4. Promote the use of process approach and risk based thinking.
  5. Ensure that the resources needed for the QMS are available; to include training, support and assessment.
  6. Communicate the importance of effective quality management and of conforming to requirements of the QMS.
  7. Ensuring the QMS achieves its intended results.
  8. Engage with and direct employees to contribute to the effective working of the QMS.
  9. Promote Continuous improvement.
  10. Establish partnerships with suppliers and interested parties to provide an improved service to Customers

This policy will be communicated to all employees and organizations working for or on behalf of the Company. Employees and other organizations are expected to co-operate in the implementation of this policy.

This policy will be reviewed annually by top management; when deemed necessary it will be amended and reissued.

Our ISO 9001:2015 certificate is available to interested parties via the link below:

Cannon BSI Quality Certificate

BS EN ISO 14001: 2015 Environmental Management System

Cannon Technologies is located close to several protected areas, e.g. the New Forest National Park and the cliffs at Highcliffe.

High Quality has always been a core value of the Cannon Technologies Group.

Quality procedures are fully integrated into the Cannon culture to ensure that Cannon customers receive predicable and continuous high quality products and services.

 Cannon Technologies Group

Company Environmental Policy Statement

Cannon Technologies Ltd is an environmentally aware business that recognises the importance of environmental protection and is committed to operating its business responsibly and in compliance with all legal requirements

Cannon Technologies specialises in the design; procurement and manufacture of Data Management Systems; enclosures and associated equipment. Supplying mainly to technology markets.

The nature of the company’s activities places particular emphasis on experience; expertise, capability, performance, safety and reliability.

A key way to achieve this is by operating a environmental management system in accordance with the requirements of the BS EN ISO 14001: 2015 Standard

Top management is committed to:-

a)       Satisfying the requirements of the management system by ensuring that applicable statutory regulations are determined; understood and met.

b)      The continual improvement of the EMS by ensuring that potential risks are identified that may impact the environment as a result of Company activities.

Top management shall:-

a)       Assess and regularly re-assess the environmental effects of the Organisation’s activities on the local and general environment.

b)      Ensure that training of employees in environmental issues is carried out.

c)       Reduce to a minimum material wastage.

d)      Minimise energy wastage.

e)       Promote the use of recyclable and renewable materials.

f)       Prevent possible pollution to controlled waters and of contamination of land and also releasing particulate matter to air as a result of company activities.

g)      Control noise emissions from company operations.

h)      Minimise the risk to the general public and employees from operations and activities undertaken by the Organisation.

i)        Take into consideration the needs and expectations of interested parties.

This policy will be communicated to employees and organizations working for or on behalf of the Company. Employees and other organizations are expected to co-operate in the implementation of this policy.

This policy will be reviewed annually by top management; when deemed necessary it will be amended and reissued.

Our ISO 14001:2015 certificate is available to interested parties via the link below:

Cannon ISO 14001:2015 Environmental Management System Certificate

RISQS Qualified

As a supplier into the Transportation Sector, we believe that maintaining our RISQS certification is paramount to providing our clients with the assurance that we strive to provide best in class, quality and business systems.

Cannon RISQS Certificate

Cannon Technologies is located close to several protected areas, e.g. the New Forest National Park and the cliffs at Highcliffe.

High Quality has always been a core value of the Cannon Technologies Group.

Currently Cannon Technologies is certified by the British Standard Institution (BSI) to the highest level possible 9001:2015 and was one of the first organisations to achieve this certification.

Quality procedures are fully integrated into the Cannon culture to ensure that Cannon customers receive predicable and continuous high quality products and services.

RoHS & WEEE Compliance

Quality procedures are fully integrated into the Cannon culture to ensure that Cannon customers receive predicable and continuous high quality products and services.

RoHS

The Cannon Technologies Group specialises in the design, procurement and manufacture of electronic enclosures and associated electronic equipment.

All of Cannon Technologies products comply with the requirements of the

EU RoHS Directive 2015 /863 (RoHS 111)

Cannon Technologies is committed to compliance to all applicable regulations regarding the restriction of hazardous substances in its electronic products.

Cannon Technologies is working with supply chain partners to ensure that only conforming product is procured.

Such Companies are: – Suppliers of electrical components, plastics, paint products, plated steel product, fixings, packaging products and welding commodities.

REACH

REACH is the European Community Regulations regarding chemicals and their use.

The intent of this legislation is to improve the protection of human health and provides added protection for the general Environment.

Cannon Technologies Ltd supports these aims and objectives.

Download our RoHS & Reach Policy certification by clicking the links below:

Cannon RoHS Policy Statement

Cannon REACH Policy Statement

BS ISO 45001: 2018 Health & Safety Management System

Cannon Technologies  is a Health and Safety aware business.

We recognise the value and importance of Health and Safety Management Systems and are committed to operating our business responsibly and in compliance with all legal requirements.

The nature of the company’s activities places particular emphasis on experience; expertise, capability, performance, safety and reliability.

A key way to achieve this is by operating a H & S Management system in accordance with the requirements of the BS ISO 45001: 2018 Standard

Click the link below to download our latest certificate:

Cannon ISO 45001 Certificate

Cannon Technologies is located close to several protected areas, e.g. the New Forest National Park and the cliffs at Highcliffe.

High Quality has always been a core value of the Cannon Technologies Group.

Currently Cannon Technologies is certified to ISO 45001:2018

Quality procedures are fully integrated into the Cannon culture to ensure that Cannon customers receive predicable and continuous high quality products and services.